Zero Hour
A framework for establishing and maintaining documented cooling system readiness.
ENFORCER
Zero Hour Certified Cooling System
MEET THE ZERO HOUR ENFORCER
A protector with a purpose.
A program behind the shield.
He stands for a clear mission: understand your cooling system, address the conditions that threaten its performance, and maintain a documented baseline of readiness.
For natural gas compression engine cooling systems.
01 / The mission
Protection starts
with a process.
The Enforcer is the face of Ultimate Chemicals' commitment to disciplined cooling system care. Not guesswork. Not a universal chemical treatment. A process built around the actual condition of the system.
His shield brings the story together: the Zero Hour program, the CURE Protocol, the appropriate products, and the people who inspect, service, and verify the equipment.
CURE
Collect, Understand, Recommend, Execute. Evidence directs the response.
People + products
Appropriate chemistry, mechanical inspection, correct procedures, and verification.
02 / The method
His code of protection:
the CURE Protocol.
A laboratory report is the starting point. CURE connects that evidence with system information to support a focused maintenance plan.
-
Collect
Gather the coolant analysis, unit information, operating concerns, and maintenance history.
-
Understand
Interpret the available findings and identify what they reveal about the system's condition.
-
Recommend
Choose a response supported by the evidence. Not every system needs a chemical flush.
-
Execute
Follow the applicable procedure, address mechanical concerns, and document the completed work.
No coolant analysis yet?
Explore Enhanced Coolant Analysis
Start with Enhanced Coolant Analysis from Lab One Inc. Laboratory testing supplies the evidence; CURE supports the next decision.
03 / Behind the shield
More than a badge.
A documented baseline.
Zero Hour describes cooling system readiness established through inspection, analysis, appropriate corrective work, and verification. It does not reset engine hours or make worn equipment new.
- Clean External surfaces and internal contamination are addressed as required.
- Verified Coolant condition and relevant mechanical concerns are reviewed.
- Documented Findings, corrective actions, and operating observations are recorded.
- Maintained Follow-up analysis and inspections support continued readiness.
The Enforcer represents that commitment. The actual protection comes from following the program and completing the work.
Read the full Zero Hour program04 / The tools behind the mission
The right response.
Not every product.
Ultimate Chemicals products support specific maintenance needs. Select them for the condition identified, not simply because they belong to the same program.
Exterior cleaning
CC-300 Cooler Cleaner
For external fin-fan cooler cleaning. Use the required foaming tip and follow the applicable cleaning procedure.
View CC-300 Cooler CleanerBAD Bad Ass Degreaser
For skid and equipment cleaning as part of a maintenance approach that includes inspection and attention to visible concerns.
View BAD Bad Ass DegreaserCondition-specific internal treatment
The Royal Flush family provides targeted options. A recommendation may call for no flush, one flush, or an approved two-flush combination.
- HDF Heavy Duty Flush For confirmed burnt glycol contamination.
- PMF Preventive Maintenance Flush For preventive cleaning and preparation when changing coolant types.
- OCF Oil Contamination Flush For severe oil contamination in the cooling system.
- PO4FIX Phosphate Fix For qualifying phosphate contamination and related residue.
- RRF Rust Removal Flush For rust deposits requiring targeted removal.
Ongoing protection and follow-up
CRI Corrosion Rust Inhibitor
Supports corrosion protection where specified in the applicable maintenance procedure. Follow the approved application and equipment requirements.
View CRI Corrosion Rust InhibitorKeep the baseline current
Continue coolant analysis, inspections, and maintenance records. Use new findings to review the system against its previous condition.
Submit a follow-up coolant analysisThese are application summaries, not treatment instructions. Product combinations, procedures, and runtimes must follow the applicable recommendation and current product documentation.
Know the condition. Follow the program.
Put the process
behind the protection.
Have a coolant analysis report? Start with CURE. Ready to discuss Zero Hour for your equipment? Talk with our team.
We measure success in degrees°.